Cassie Q

PLEASE NOTE: HENRY HANDGUARDS NO LONGER NEED A NEW BARREL TENON FOR INSTALLATION. YOU WILL BE USING THE TENON THAT CAN INSTALLED FROM THE FACTORY.   HENRY RIFLE CALIBER RIFLES - 4570- GOVT, 30-30 W...

We sell two peep sight that work universally on all Rimfire 22 rifles (Henry Rimfire, Rossi Rio Bravo, Ruger 10/22, etc.). Our peep sight slides onto the top of the receiver rail's dovetail rail.  ...

Replacement tenon Installation - Recommend tenon fit is snug, but not excessively tight. A light friction fit will suffice, but a loose fit will be weak. - If the tenon is too tight, slowly lap t...

A number of our parts are SASS approved for competition shooting. Those include: Rossi Trigger, Marlin Trigger, Marlin or Rossi Loading Gate, Marlin or Rossi lever.

Most Marlin and Henry factory triggers come with a 5# - 7# trigger pull. Our Marlin and Henry trigger kits uses a different sear angle and a precision cut sear edge to reduce friction and weight by...

Marlin Rifle: The conversion can be done with three parts: Marlin 336/444/1895 pistol grip trigger guard, pistol grip lever, and a pistol grip butt stock. The trigger guard can be tricky to find bu...

This movement is normal. The trigger MUST rotate forward due to the operation of the Marlin design. This is to get out of the way of the lever when opening and to allow the sear to travel forward e...

Marlin and Rossi 95 levers have a “plunger hole” on top of the latch paw where a plunger and spring are installed down inside the hole and a cross- pin holds them in place. The plunger claw grabs t...

Yes! The Glenfield rifles are identical to the Marlin 336 30-30 rifles. The Glenfield name was used on the b/c they were a white-label model sold in the Sears Roebuck catalogs.    MARLIN AND GLENFI...