INSTALL: Ranger Point Precision Rhino Rail/ Receiver Rail

• First, ensure that the firearm is unloaded and no ammunition is present.
• Do an inventory of the packaging. You should have one receiver rail and 3 or 4 screws, depending on the model of receiver rail.
• Gather the appropriate tools.
• Remove the plug screws in the top of the receiver.
• Align receiver rail with the curved end at the rear of the receiver.
• Apply blue or purple loctite to the hardware and place them into the receiver rail mounting holes.
• Using the appropriate tool, torque the hardware hand tight.
• Install the picatinny compatible optic/ rings of your choice.